When to Get Service and Replace Your Electric Panel?

Estimated read time 3 min read

Replacement of Electric Panel

There is a tendency for users to alter the electrical load of their electric panel over time. If this is a permanent adjustment, a “current injection” tester will need to be used to reset the electrical trip characteristics, and the device as a whole will need to be recalibrated.

The age of the item, its working environment, the frequency of emergency operations, etc. all affect the time between scheduled maintenance.

Licensed electric companies generally advise servicing equipment every two to three years, although an annual checkup may be necessary for older units, those that have undergone a large number of emergency operations, and those that are located in very dusty or humid areas.

Conformity with current standards requires including calibration and certification as part of routine inspection and testing procedures.

When You Need to Replace Electric Panel?

The Age of the Electrical Panel Is Greater Than 25 Years

It’s recommended to replace electrical panels after 25 years, despite the fact that certain models have a lifespan of up to 40 years. A quick response is not required if your panel is functioning normally.

Still, it’s best to have an expert electrician take a look so you know what to do next.

Bad Smell of Burning

Is there a smoky smell by the electrical panel? Warning bell, right here. The smell may be coming from melted wires, burned wood, or charred insulation.

If your home’s circuit breakers have been broken, you should have a professional electrician replace them immediately to avoid the risk of a fire.

Frequent Tripping of Circuit Breakers

Your circuit breaker will trip occasionally when it detects and shuts off an excessive electrical surge. There’s a concern, though, if this keeps happening regularly.

If the breaker keeps tripping, it’s probably because the current is too high for it to manage.

No More Outlets Are There

It’s possible that you’re having electrical panel problems because you don’t have enough wall outlets. It is possible to add more outlets and extra circuits to some panels.

On the other hand, newer circuits may not be compatible with older panels, therefore it may be time for an upgrade.

You Bought a Big Electrical Appliance!

Large electrical loads require more power to operate. Because of this, installing a new dishwasher or comparable appliance may cause your circuit breaker to trip.

You may need to install a new circuit breaker before you can turn on any new appliances.

More From Author